There are several options for configuring the patient's physical examination screen. 


Option #1

  • Click on the QuickLinks text, located at the top of the screen. 

  • Select the Settings” option.

  • The following screen will be displayed: 
  • Click on the Clinical button and then select the Physical Examination option.

  • The following screen will be displayed:


  • Select the supplier to which you want to configure the diagram to be displayed in the Physical Examination screen (the screen will be displayed with the supplier that is connected by default).


  • Press the Add Diagram button, located at the top of the screen. 


  • The following screen will be displayed:


  • Press the Browse button if you have a downloaded diagram on your system.

  • Press the Scan button to scan the image.

  • Press the Webcam button to take the picture from the system. 

  • Press the Save button.

  • The following screen will be displayed:

  • Fill in the required information. 
  • Press the Save button to save the changes. 
  • Automatically, the diagram will be displayed in the Diagrams section.


  • If you want the added diagram to be displayed by Default in the Physical Examination screen, press the Edit button.


  • Select the options in the image.  
  • Once the options have been selected, press the Save button, located at the top of the screen.  


  • This will be displayed in the Physical Examination screen, when the Add button is pressed.


Option #2

  • Press the Settings button in the main menu. 


  • The following screen will be displayed: 
  • Click on the Clinical button and then select the Physical Examination option.

  • The following screen will be displayed:


  • Select the supplier to which you want to configure the diagram to be displayed in the Physical Examination screen (the screen will be displayed with the supplier that is connected by default).


  • Press the Add Diagram button, located at the top of the screen. 


  • The following screen will be displayed:


  • Press the Browse button if you have a downloaded diagram on your system.

  • Press the Scan button to scan the image.

  • Press the Webcam button to take the picture from the system. 

  • Press the Save button.

  • The following screen will be displayed:


  • Fill in the required information. 
  • Press the Save button to save the changes. 
  • Automatically, the diagram will be displayed in the Diagrams section.


  • If you want the added diagram to be displayed by Default in the Physical Examination screen, press the Edit button.


  • Select the options in the image.  
  • Once the options have been selected, press the Save button, located at the top of the screen.  


  • This will be displayed in the Physical Examination screen, when the Add button is pressed.



Recommended Article: