There are several options to configure the information of an office or center. 


Option #1

  • Click on the QuickLinks text, located at the top of the screen. 

  • Select the Settings option.

  • The following screen will be displayed:  


  • Press the Office button and then select the Office Information option.


  • The following screen will be displayed:  
  • Press the Add button, located at the top of the screen.


  • The following screen will be displayed:

          

  • Fill out all required fields, identified with an *: description, physical address and phone number.
  • To select the location as an emergency room, you must contact our service personnel at 787-625-0440. The following message will be displayed:


  • Pressing the Ok and Save button will automatically restart the system.
  • Add the LOGO of the office or center by pressing the Add Picture button.


  • The following screen will be displayed:


  • Select the Browse button.
  • Select the Logo and press the Open button.

         

  • Press the Save button to save the changes. 
  • The following message will be displayed:


  • Press the Yes button to continue and save.
  • Press the No button to cancel the action. 


Option #2

  • Press the Settings button in the main menu.  


  • The following screen will be displayed:  


  • Press the Office button and then select the Office Information option.


  • The following screen will be displayed:  


  • Press the Add button, located at the top of the screen.


  • The following screen will be displayed:

          

  • Fill out all required fields, identified with an *: description, physical address and phone number.
  • To select the location as an emergency room, you must contact our service personnel at 787-625-0440. The following message will be displayed:


  • Pressing the Ok and Save button will automatically restart the system.
  • Add the LOGO of the office or center by pressing the Add Picture button.


  • The following screen will be displayed:


  • Select the Browse button.
  • Select the Logo and press the Open button.

         

  • Press the Save button to save the changes. 
  • The following message will be displayed:


  • Press the Yes button to continue and save.
  • Press the No button to cancel the action. 



Recommended Article: